Products

  • Preformed Dead End Guy Grip

    Preformed Dead End Guy Grip

    Preformed Tension Clamp are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.

    Tension Clamp are designed to connect OPGW cables and tensile poles (or towers). Armor rods can protect and provide cushioning to the OPGW cables. The special design of Armor rods makes ensure that Tension Clamps can not cause undue stress to the OPGW cables,so that the normal lifetime of cable system is ensured.

    It is used for the branch connection of insulated cables in building power distribution systems, the connection of low-voltage overhead insulated cables, the branch connection of low-voltage insulated household cables, and street lamp power distribution systems.

  • Strain clamp

    Strain clamp

    Material: steel/alloy

    Size: All

    Coating: Galvanized

    Purpose: Power distribution equipment

  • CPTAU series pre-insulated bimetallic cable lugs

    CPTAU series pre-insulated bimetallic cable lugs

    DTL-4 pre-insulated bimetallic lugs are used to establish the connection between LV-ABC cables and electrical equipment. The palm is made of 99.9% pure copper and the sleeve is made of 99.6% pure aluminum. The cross section of the conductor can be elastic The color code of the ring easily identifies the elastic ring and the pre-filled grease to make it super waterproof. The water tightness test is conducted at 6KV under water for one minute. The insulation tube is made of weather-resistant and UV-resistant polymer.

  • JJCD/JJCD10  insulation piercing grounding clamp

    JJCD/JJCD10 insulation piercing grounding clamp

    High Voltage 10kV two bolts Insulation Piercing Connector with Grounding rings for Earthing Protection

    Description

    10kv two bolts insulation piercing connector with Earthing Ring for Earthing Protection and Temporary Electrical Inspection.It is suitable for majority types of  ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Tightening torque guaranteed(fuse nut). Stripping of insulation is avoided.

    Service condition: 400/600V, 50/60Hz, -10°C to 55°C

    Standard: IEC 61284, EN 50483, IRAM2435, NFC33 020.

    Suitable for Aluminum and copper conductors

  • 1KV 10KV insulation piercing clamp

    1KV 10KV insulation piercing clamp

    Insulation Piercing Connector IPC connector is suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided.

  • TTD Insulated piercing connector (fire resistance)

    TTD Insulated piercing connector (fire resistance)

    The connector was use for contact live or dead line work, and the main& tap line was all for insulated Aluminum or Copper conductor. The connector withstanding 6kV flashover under the water. Its insulating body is highly climatic and mechanically resistant.

    It was easy to install and safe to use. The simultaneous insulation piercing on main and tap, the tightening screws was made of Dacromet steel. Protection against water in shunted cable by tightness joined and insulating end caps. The branch can be on the left or on the right.

    To install easily one bolt connectors with high tightening torque.

     

  • PAL Aluminum tension clamp anchor clamp

    PAL Aluminum tension clamp anchor clamp

    Description:

    >The body is made of aluminum alloy

    >The cleats are made of UV resistant synthetic material. They are captive.

    >The stainless steel flexible linking cable is captive.It is equipped with a resistant,insulated and movable saddle.

    >Fixing the insulated neutral messenger is ensured by cleats without damaging the insulation.

  • NLL Bolted type strain clamp

    NLL Bolted type strain clamp

    Tension Clamp

    Tension clamp is one type of single tension hardware that used for completing the tensional connection on a conductor or cable, and it provides mechanical support to the insulator and conductor. It is usually used with fitting like clevis and socket eye on the overhead transmission lines or distribution lines.

    Bolted type tension clamp is also called dead end strain clamp or quadrant strain clamp.

    Depending on the material, it can be divided into two series: NLL series tension clamp is made of aluminum alloy, while the NLD series is made of malleable iron.

    NLL tension clamp can be classified by the conductor diameter, there are NLL-1, NLL-2, NLL-3, NLL-4, NLL-5 (the same for the NLD series).

     

     

  • VCXI Bimetallic Shear Bolt Lug

    VCXI Bimetallic Shear Bolt Lug

    Outline

    Suitable for aluminum、aluminum alloy cables and electrical equipment with rated voltages of 1KV and below Copper terminal transition connection

    Material

    Body: high-strength aluminum alloy and Cu≥99.9%

    Bolt: brass or aluminum alloy

    Facial treatment: pickling

    Standard

    IEC 61238:2003、 GB/T 9327-2008

  • DTLL Bimetallic mechanical lug

    DTLL Bimetallic mechanical lug

    Bimetallic mechanical lug is used to connect the conductors and connection points of the distribution lines with rated voltages of 35KV and below to the copper-aluminum transition terminals of flat-panel electrical equipment; applicable conductors: aluminum and aluminum alloy conductors.

  • Parallel Groove Clamp

    Parallel Groove Clamp

    Energy-saving torque clamp is the non-load-bearing connection fittings,mainly used in transmission lines, distribution lines and substation line system, splicing and play a lead role in jumpers.

    Applicable to aluminium wire,copper wire,overhead insulated wire, ACSR wire,etc., but also for copper wire pair copper wire, aluminum wire to aluminum wire, copper wire to aluminum conductors such transition.

  • NES-B1  Tension clamp

    NES-B1 Tension clamp

    The fixture consists of a main body, a wedge and a removable and adjustable lifting ring or pad.

    The single-core anchor clip is designed to support the pneumatic messenger and the wedge can be automatically adjusted.Wire or street lamp wire clip along the lead.Automatic opening features an integrated spring facility to facilitate the insertion of wires into the fixture.

    Material

    The clamps are made of weather-resistant and uV-resistant polymers or aluminum alloy bodies with polymer wedge cores.

    Adjustable connecting rod made of hot-dipped galvanized steel (FA) or stainless steel (SS).