Shear bolt connector

  • BLMT/BLMC Mechanical Shear Bolt Lugs

    BLMT/BLMC Mechanical Shear Bolt Lugs

    Typical Application: LV & MV conductor connections for Cable terminations & Joints

    Mechanical connectors are designed for use in LV and MV applications.

    The Connectors consist of a tin-plated body, shear-head bolts and inserts for small conductor sizes. Made of special aluminium alloy, these contact bolts are shear-head bolts with hexagon heads.

    The bolts are treated with a lubricating wax. Both versions of contact bolts removable/ irremovable are available.

    The body is made of a high-tensile, tin-plated aluminium alloy. The internal surface of the conductor holes is grooved. Lugs are suitable for outdoor and indoor applications and are available with different palm hole sizes.

    Mechanical connectors for Straight & transition Joints are available as unblocked & blocked type. Connectors are chamfered at the edges.

  • BSM mechanical shear bolt connectors

    BSM mechanical shear bolt connectors

    BSM mechanical connectors and repair sleeves are designed for use in medium voltage cable accessories up to 42 kV. They may also beused in the l kV range.They cover conductors sizes ranging from 10mm² to 1500 mm².
    BSM connectors consist of a tin-plated body,shear bolt heads and inserts for small conductor sizes.
    Made of High-strength special aluminum alloy, these contact bolts are double shear bolt heads with hexagon heads. The bolts are treated with a highly lubricating agent. Contact bolts are irremovable once their heads have been sheared off. The lug body is made of a high-tensile, tin-plated aluminium alloy. The internal surface of the conductor holes are grooved.

  • The first stepless shear bolt

    The first stepless shear bolt

    Terminals, connectors and cable lugs using screw technology have been on the advance for years, and with good reason. The special design feature of the SICON shear bolt connectors is that there are no predetermined break points in the thread. This provides for optimal loadbearing capacity for each range of cross sections. The bolt always breaks at the surface of the clamp body, so there are no protrusions and nothing has to be filed down to make the sleeve fit. Fitting requires a simple tool – literally with a flick of the wrist. Offering a large clamping range, SICON shear bolt connectors feature a compact design with rounded edges and flat transitions suitable for slide-on and shrink sleeves

  • VCXI Bimetallic Shear Bolt Lug

    VCXI Bimetallic Shear Bolt Lug

    Outline

    Suitable for aluminum、aluminum alloy cables and electrical equipment with rated voltages of 1KV and below Copper terminal transition connection

    Material

    body: high-strength aluminum alloy and Cu≥99.9%

    Bolt: brass or aluminum alloy

    Facial treatment: pickling

    Standard

    IEC 61238:2003、 GB/T 9327-2008

  • DTLLseries Shear Bolt connectors

    DTLLseries Shear Bolt connectors

    It is used to connect the conductors and connection points of the distribution lines with rated voltages of 35KV and below to the copper-aluminum transition terminals of flat-panel electrical equipment; applicable conductors: aluminum and aluminum alloy conductors.

  • Copper Shear Bolt Splices

    Copper Shear Bolt Splices

    Our CSBS Copper Shear Bolt Splices are range taking, shear bolt connectors for copper cables from #2 AWG compact stranded to 1000 kcmil concentric stranded. Their primary application is underground network connections up to 35 kV. Key Features • Heavy-duty design made of high strength, copper alloy • Compact and smooth body design Provides long service life under normal operating conditions with reserve capacity for emergency loading conditions •Compatible with Raychem heat-shrink and cold ap...