Automatic splice connector

  • AUTOMATIC SPLICE

    AUTOMATIC SPLICE

    CORROSION RESISTANT SPLICE/AUTOMATIC SPLICE CONNECTOR

    Aluminum Automatic Splice cable connector is suitable for maintenance and repair of broken line or new line.A tension-dependent device in which the line is installed with at least 10% tension of the rated strength of the wire to ensure a reliable electrical connection, and the current is transmitted to the other end through the wire clip of the wire. Taper type automatic quick connector (full tension automatic connector)


  • Automatic Steel Guy Wire strandlink

    Automatic Steel Guy Wire strandlink

    • The GUY-LINK is used primarily by telephone and electric utilities to terminate strand or rod at the pole top and at the anchor eye. For Suspension Strand, Guy Strand and Static Wire. Used to terminate aerial support strand messenger, and at the top and bottom ends of down guys.
    • For splicing applications with overhead or support guy wires
      •  Automatic splices are designed for use on
      High Strength (HS), Common (Com), Siemens-Martin (SM), Utilities
      (Util) and Bell System strand
      • Automatic splices are designed for use on
      all guy wire types listed above, plus Extra High Strength (EHS) and
      Alumoweld (AW)
      • All GLS automatic splices will hold a minimum of 90% of the guy
      wire rated breaking strength
      Material: Shell – High Strength Aluminum Alloy
      Jaws – Plated Steel
  • Guy Strand Vise

    Guy Strand Vise

    AUTOMATIC STRAND GUY VISE

    Strand Vise is also called automatic guy wire deadend, it is a cone-shaped accessory that is usually positioned at the bottom of the transmission poles.  Here it connects with the down guy wire. Strand vise is also used on the overhead lines where it is connected to the dead-end applications. Its primary function is to terminate the guy wire and the overhead cable.

    A strand vise is designed to attach onto the cable using a finger-trap principle. Here, a spring projects its jaws onto the cable hence setting the tool. The jaws are released to prevent them from sliding upwards.

    The good thing about strand vise is it does not have nuts for exerting torque onto the cables. This means that there is no need to compress it on the sleeve.

    The solid construction of the strand vise makes it reliable for a wide range of applications and also for different environments. It features galvanized steel which is not only strong but also protected from chemical destruction.

    Strand vise can be used with different strands including alum weld, galvanized, aluminized, and EHS, steel strand.

    The strand vise design makes it compatible with a wide range of industrial strands. It can support a broad range of wires thanks to its universal bale design.