-
Matsi matsi
Abu: Karfe/Alloy
Girma: Duk
Shafi: Galvanized
Manufar: Kayan aikin rarraba wutar lantarki
-
CPTAU jerin pre-insulated bimetallic na USB lugs
DTL-4 pre-insulated bimetallic lugs ana amfani da su kafa dangane tsakanin LV-ABC igiyoyi da lantarki kayan aiki.An yi dabino da 99.9% tagulla zalla, hannun riga an yi shi da 99.6% tsantsa aluminum.Sashin giciye na madugu na iya zama na roba Lambar launi na zoben cikin sauƙi yana gano zoben roba da man mai da aka riga aka cika don sa ya zama mai hana ruwa ruwa.Ana gudanar da gwajin matse ruwan a 6KV karkashin ruwa na minti daya.An yi bututun rufewa da yumbu mai jure yanayi da kuma yuwuwar UV.
-
JJCD/JJCD10 rufin huda ƙasa manne
Babban ƙarfin wutar lantarki 10kV mai haɗawa mai ɗaukar hoto mai ɗaukar hoto tare da zoben ƙasa don Kariyar Duniya
Bayani
10kv guda biyu mai haɗin insulation insulation mai haɗawa tare da Ring Earthing don Kariyar Duniya da Binciken Wutar Lantarki na ɗan lokaci.Ya dace da yawancin nau'ikan masu gudanarwa na ABC da kuma haɗin kai zuwa sabis da hasken wutar lantarki.Lokacin daɗa kusoshi, haƙoran faranti na lamba suna shiga cikin rufin kuma suna kafa cikakkiyar lamba.Ana daure kusoshi har sai an yanke kawunan.Tabbataccen karfin juyi (fus goro).Ana guje wa cirewar rufin.
Yanayin sabis: 400/600V, 50/60Hz, -10°C zuwa 55°C
Standard: IEC 61284, EN 50483, IRAM2435, NFC33 020.
Dace da Aluminum da Tagulla conductors
-
1KV 10KV rufi mai huda matsi
Insulation Piercing Connector IPC connector ya dace da aluminum da jan karfe conductors da aka gyara ba a rasa, karshen hula a haɗe zuwa jiki, Insulation kayan da aka yi da weather resistant gilashin fiber ƙarfafa polymer, lamba haƙoran da aka yi da tinned tagulla ko jan karfe ko aluminum, aron kusa da dacromet karfe .Lokacin daɗa kusoshi, haƙoran faranti na lamba suna shiga cikin rufin kuma suna kafa cikakkiyar lamba.Ana daure kusoshi har sai an yanke kawunan.Ana guje wa cirewar rufin.
-
TTD Insulated huda connector (wuta juriya)
An yi amfani da mai haɗin haɗin don aikin sadarwa kai tsaye ko mataccen layin, kuma babban & layin famfo duk na Aluminum ne ko madubin jan ƙarfe.Mai haɗawa yana jure wa 6kV flashover ƙarƙashin ruwa.Jikin sa mai rufewa yana da matuƙar yanayin yanayi kuma yana jurewa da injina.
Ya kasance mai sauƙi don shigarwa kuma mai aminci don amfani.Hudawar rufin lokaci guda a kan babba da famfo, an yi sukurori da ƙarfe na Dacromet.Kariya daga ruwa a cikin kebul na shunted ta hanyar matsewar haɗe da insulating madafun iko.Reshe na iya kasancewa a hagu ko dama.
Don shigar da masu haɗin ƙwanƙwasa ɗaya cikin sauƙi tare da babban ƙarfin juyi.
-
PAL Aluminum tashin hankali matsa
An ƙera maƙallan anga don ɗaure babban layin da aka keɓe tare da madugu 4 zuwa sandar sanda, ko layin sabis tare da madugu 2 ko 4 zuwa sandar ko bango.Manne ya ƙunshi jiki, ƙugiya da beli ko kushin da za a iya cirewa.
Ɗayan ƙwanƙwasa ƙwanƙwasa ƙwanƙwasa an tsara shi ne don tallafawa manzo mai tsaka tsaki, ƙugiya na iya zama mai daidaitawa.Buɗewar kai yana bayyana ta hanyar haɗaɗɗun wuraren bazara don sauƙin shigar da madugu cikin matsewa. -
NLL Bolted nau'in nau'in matsi
Tashin hankali
Damke tashin hankali shine nau'i ɗaya na kayan aikin tashin hankali guda ɗaya waɗanda aka yi amfani da su don kammala haɗin kai a kan madugu ko kebul, kuma yana ba da tallafin inji ga insulator da madugu.Yawancin lokaci ana amfani da shi tare da dacewa kamar clevis da socket eye akan layin watsa sama ko layin rarraba.
Har ila yau ana kiran nau'in tashin hankali na nau'in ƙugiya ko kuma maɗaɗɗen nau'i na quadrant.
Dangane da kayan, ana iya raba shi zuwa jerin biyu: NLL jerin tashin hankali manne an yi shi da aluminum gami, yayin da NLD jerin aka yi da malleable baƙin ƙarfe.
NLL tashin hankali matsa za a iya classified ta hanyar madugu diamita, akwai NLL-1, NLL-2, NLL-3, NLL-4, NLL-5 (daidai ga NLD jerin).
-
VCXI Bimetallic Shear Bolt Lug
Shaci
Dace da aluminum, aluminum gami igiyoyi da lantarki kayan aiki tare da rated voltages na 1KV da kasa Copper m miƙa mulki dangane
Kayan abu
jiki: high-ƙarfi aluminum gami da Cu≥99.9%
Bolt: tagulla ko aluminum gami
Maganin fuska: pickling
Daidaitawa
IEC 61238: 2003, GB/T 9327-2008
-
DTLL Bimetallic inji lugga
Ana amfani da lugga na inji na Bimetallic don haɗa masu gudanarwa da wuraren haɗin kai na layin rarraba tare da ƙimar ƙarfin lantarki na 35KV da ƙasa zuwa madaidaicin jan ƙarfe-aluminum na kayan aikin lantarki na lebur-panel;masu gudanarwa masu dacewa: aluminum da aluminum gami.
-
Parallel Tsagi Matsa
Matsakaicin karfin wutar lantarki shine kayan haɗin haɗin da ba mai ɗaukar nauyi ba, galibi ana amfani dashi a cikin layin watsawa, layin rarrabawa da tsarin layin ƙasa, rarrabawa da taka rawar jagora a cikin masu tsalle.
Aiwatar da aluminum waya, jan karfe waya, saman rufi waya, ACSR waya, da dai sauransu, amma kuma ga jan karfe waya biyu jan karfe waya, aluminum waya zuwa aluminum waya, jan karfe waya zuwa aluminum conductors irin wannan mika mulki.
-
NES-B1 Tashin hankali
Ƙaddamarwa ta ƙunshi babban jiki, ƙugiya da zoben ɗagawa mai cirewa da daidaitacce.
An ƙera faifan anka guda ɗaya don tallafawa manzo na pneumatic kuma za'a iya daidaita ƙugiya ta atomatik.Wayar waya ko fitilar fitilar waya clip ɗin waya tare da jagorar.Buɗewar atomatik yana fasalta kayan aikin bazara mai haɗaka don sauƙaƙe shigar da wayoyi a cikin na'urar.
Kayan abu
An yi maƙullan da yumbu masu jure yanayi da polymers masu juriya da uV ko jikin gami na aluminium tare da muryoyin igiya na polymer.
Daidaitaccen sandar haɗawa da aka yi da ƙarfe mai galvanized mai zafi (FA) ko bakin karfe (SS).
-
NXJ Aluminum Tension Clamp
NXJ jerin ya dace da nau'in matsi mai rufin kirtani na 20kV mai rufin iska na aluminium core waya JKLYJ tashar jiragen ruwa ko gyare-gyaren ƙare biyu da kuma ƙarfafa rufin iska.
