Preformed guy grip with dead end clamp

  • Preformed dead end guy grip

    Preformed dead end guy grip

    Material
    Ground wire for steel conductor; wire clamp is used for galvanized steel.
    Aluminum-clad steel, good conductor ACSR, wire clamp is used for aluminum-clad steel wir

  • Preformed guy grip with dead end clamp

    Preformed guy grip with dead end clamp

    Component

    Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.

    Characteristic

    1. Stress is distributed equally, without stress focus. It can protect optical cables very well.

    2. Under the condition of not exceeding the intensity of cable’s side pressure, it has higher grip power for the cable, and can support higher tensile force.

    3. The grip power for the cable is not less than 95% of rating’s pulling resisting intensity of the optical cable, completely satisfying the needs of setting up the cable.

    Preformed line material: Aluminum clad steel wire

  • Preformed guy grip with dead end clamp

    Preformed guy grip with dead end clamp

    The preformed tension set is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability and economic performance of the product is better than the bolt type and hydraulic type tension clamp that widely used in the current circuit.
    Innovative structure and precision design, so that the preformed tension set has a reliable performance and it is usually made of aluminum clad steel, galvanized steel wire and other materials.

    Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables  system.

    Preformed line material:  Aluminum clad steel wire or galvanized steel wire.

  • Preformed guy grip

    Preformed guy grip

    Dead end preformed is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability and economic performance of the product is better than the bolt type and hydraulic type tension clamp that widely used in the current circuit. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be made of galvanized steel or aluminium clad steel.

    Preformed line material: Aluminum clad steel wire

  • FDY Vibration damper

    FDY Vibration damper

    Clamp Type Vibration Damper for ADSS/OPGW cables, withtuning fork structure of Damper Weight,  is validated byChina Electric Power Research Institute that there are four frequency between 5~150HZ, and its vibration range is wider than FG Damper or FD Damper. Plenty Vibration Dampers have been installed on ADSS cables.

  • Aluminum Alloy Preformed Dead End Guy Grip

    Aluminum Alloy Preformed Dead End Guy Grip

    Aluminum Alloy Preformed Dead End Guy Grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines.

    The guy-grip dead end clamp for conductor can be applied to bear strain on overhead bared or insulated covered conductors in transmission & distribution lines.
    It’s the substitutes of the traditional dead end clamps such as bolted type, compression type and wedge type.

    Aluminum alloy dead end grip with insulation coating for telecom cable, insulator conductor, fiber cable, TV cable, Digital cable

    The aluminum alloy dead end grip with insulation coating has the main function to fix a pole/tower the cables, conductors, strands, structures

    The area of the loop always must be protect with a suitable thimble, pulley, insulator etc. Preformed line material:  Aluminum clad steel wire or galvanized steel wire.

    Aluminum Alloy Helical Preformed Dead End Guy Grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines.

     

  • PREFORMED DEAD END GUY GRIP

    PREFORMED DEAD END GUY GRIP

    Preformed Tension Clamp are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.

    Tension Clamp are designed to connect OPGW cables and tensile poles (or towers). Armor rods can protect and provide cushioning to the OPGW cables. The special design of Armor rods makes ensure that Tension Clamps can not cause undue stress to the OPGW cables,so that the normal lifetime of cable system is ensured.

    It is used for the branch connection of insulated cables in building power distribution systems, the connection of low-voltage overhead insulated cables, the branch connection of low-voltage insulated household cables, and street lamp power distribution systems.