Alaabta

  • Strain clamp

    Isku dhejinta

    Waxyaabaha: birta/daawaha

    Cabbirka: Dhammaan

    Dahaarka: Galvanized

    Ujeedada: Qalabka qaybinta korontada

  • CPTAU series pre-insulated bimetallic cable lugs

    CPTAU taxane ah oo hore loo dahaaray lugaha fiilada bimetallic

    DTL-4 lugaha bimetallic pre-dahaaran ayaa loo isticmaalaa si loo dhiso xidhiidhka ka dhexeeya fiilooyinka LV-ABC iyo qalabka korontada.Timirtu waxay ka samaysan tahay 99.9% naxaas saafi ah, gacantuna waxay ka samaysan tahay 99.6% aluminium saafi ah.Qaybta iskutallaabta ee kirishbooyuhu waxay noqon kartaa mid laastikada ah Koodhka midabka giraanta ayaa si fudud u tilmaamaya giraanta laastikada iyo dufanka hore loo buuxiyay si looga dhigo mid aan biyuhu ahayn.Tijaabada cidhiidhiga biyaha waxaa lagu sameeyaa 6KV biyaha hoostooda hal daqiiqo.Tuubada dahaarka waxay ka samaysan tahay polymer u adkaysata cimilada iyo UV.

  • JJCD/JJCD10  insulation piercing grounding clamp

    JJCD/JJCD10 dahaarka daloolinta dhulka isku xidhka

    Voltage Sare 10kV laba boolal Xidhiidhiyaha Daloolinta Dahsoon oo leh giraangiraha dhulka ee Ilaalinta Dhulka

    Sharaxaada

    10kv laba bool oo dahaarka daloolin xiriiriyaha oo leh Earthing Ring ee Ilaalinta Dhulka iyo Kormeerka Korontada Ku Meel Gaarka ah.Waxay ku habboon tahay badi noocyada kirishbooyada ABC iyo sidoo kale isku xirka adeegga iyo iftiiminta xargaha fiilooyinka.Marka la adkeeyo boolalka, ilkaha taarikada xiriirku waxay galaan daboolka waxayna sameeyaan xiriir qumman.Daboolka waa la adkeeyaa ilaa ay madaxyadu xiiraan.Qulqulka adkaanta waa la damaanad qaaday (fiyuuska fiyuuska).Ka-saarista dahaarka waa la iska ilaaliyaa.

    Xaaladda adeegga: 400/600V, 50/60Hz, -10°C ilaa 55°C

    Heerka: IEC 61284, EN 50483, IRAM2435, NFC33 020.

    Ku haboon aluminium iyo naxaasta kirishbooyada

  • 1KV 10KV insulation piercing clamp

    1KV 10KV dahaadhka daloolinta

    Xidhiidhiyaha Dahaarka Xidhiidhiyaha IPC wuxuu ku haboon yahay aluminium iyo naxaasta iyo qaybaha aan la lumin karin, daboolka dhamaadka ee jidhka ku xiran, Walxaha dahaadhka ah ee ka samaysan muraayadda cimilada u adkeysata ee polymer la xoojiyay, ilko xiriiri oo ka samaysan naxaas qasacadaysan ama naxaas ama aluminium, bolt ka samaysan birta dacromet .Marka la adkeeyo boolalka, ilkaha taarikada xiriirku waxay galaan daboolka waxayna sameeyaan xiriir qumman.Daboolka waa la adkeeyaa ilaa ay madaxyadu xiiraan.Ka-saarista dahaarka waa la iska ilaaliyaa.

  • TTD Insulated piercing connector (fire resistance)

    Xidhiidhiyaha daloolinta ee TTD (iska caabinta dabka)

    Xidhiidhiyaha waxa loo istcimaali jiray xidhiidh toos ah ama shaqo khad dhintay, iyo khadka ugu weyn& tuubada waxa ay wada ahaayeen aluminium dahaaran ama kirishbooyada.Xidhiidhiyaha u adkeysanaya 6kV biyaha hoostiisa.Jidhkeeda dahaarka waa cimilo aad u saraysa oo si farsamaysan u adkaysta.

    Way fududahay in la rakibo oo ammaan ah in la isticmaalo.Dahaarka isku mar ah ee ka dhex dusaya tubada weyn iyo tuubada, boolal adkaynta ayaa laga sameeyay birta Dacromet.Kahortagga biyaha ee fiilada shunt ah iyadoo la adkeynayo oo la isku xirayo oo daboolaya koofiyadaha dhamaadka.Laantu waxay noqon kartaa bidix ama midig.

    Si aad si fudud ugu rakibto hal xidhiyaal bool ah oo leh torque adkaynaya oo sarreeya.

     

  • PAL Aluminum tension clamp

    PAL Aluminium xajinta xiisadda

    Xajinta barroosinka waxaa loogu talagalay in lagu xidho xariiqda weyn ee dahaaran oo leh 4 kirishbooye oo tiirka ah, ama khadadka adeegga ee leh 2 ama 4 kirishbooyada tiirka ama gidaarka.Isku-xidhku waxa uu ka kooban yahay jidh, qolof iyo damiin laga saari karo oo la hagaajin karo.
    Mid ka mid ah xargaha barroosinka ee xudunta u ah ayaa loo qaabeeyey si ay u taageeraan farriinta dhexdhexaadka ah, jeexdintu waxay noqon kartaa mid is- hagaajinaysa.Furitaanka iskiis waxaa ka muuqda qalab is-dhexgal ah oo gu'ga ah si ay si fudud u geliyaan kirishbooyga xirmada.

     

  • NLL Bolted type strain clamp

    NLL nooca dabada la isku xidho

    Xannibaadda

    Xakamaynta xiisaddu waa hal nooc oo ka mid ah qalabka hal-abuurka ah ee loo isticmaalo dhamaystirka xidhiidhka kacsanaanta ee kirishbooyada ama fiilada, waxana ay siisaa taageero makaanik dahaarka iyo kirishbooyada.Caadi ahaan waxaa loo adeegsadaa ku-xidhnaanta sida clevis iyo isha godka ee xadhkaha gudbinta sare ama xadhkaha qaybinta.

    Isku dhejinta nooca bowdada ah waxaa sidoo kale loo yaqaan 'deck end strain clamp' ama ciriiriga afar geesoodka ah.

    Iyada oo ku xidhan maaddada, waxa loo qaybin karaa laba taxane: NLL taxane xiisadda xajin waxa uu ka samaysan yahay aluminium alloy, halka taxanaha NLD ka samaysan yahay bir malleable.

    Xajinta xiisadda NLL waxaa lagu kala saari karaa dhexroorka kaari, waxaa jira NLL-1, NLL-2, NLL-3, NLL-4, NLL-5 (isku mid ah taxanaha NLD).

     

     

  • VCXI Bimetallic Shear Bolt Lug

    VCXI Bimetallic Shear Bolt Lug

    dulmar

    Ku haboon aluminium, fiilooyinka aluminium aluminium iyo qalabka korantada oo leh danab lagu qiimeeyay ee 1KV iyo ka hooseeya xidhiidhka kala guurka ee Copper

    Qalab

    jirka: aluminium aluminium awood sare leh iyo Cu≥99.9%

    Bolt: naxaas ama aluminium alloy

    Daawaynta wajiga: pickling

    Heerka

    IEC 61238: 2003, GB/T 9327-2008

  • DTLL Bimetallic mechanical lug

    DTLL Bimetallic lugaha farsamada

    lugaha farsamada ee bimetallic waxaa loo isticmaalaa in lagu xiro kirishbooyada iyo goobaha isku xirka ee khadadka qaybinta oo leh koronto lagu qiimeeyay 35KV iyo ka hooseeya ilaa maroodiga-aluminiumka kala-guurka ee qalabka korantada ee flat-panel;kirishbooyada lagu dabaqi karo: aluminium iyo aluminium daawaha aluminium.

  • Parallel Groove Clamp

    Isbarbar yaaca Groove Clamp

    Xakamaynta tamar-badbaadinta tamartu waa xidhidhiyeyaasha isku xidhka aan culayska saarnayn, inta badana loo isticmaalo xadhkaha gudbinta, xadhkaha qaybinta iyo nidaamka xadhkaha substation-ka, kala qaybinta iyo ciyaara doorka hogaaminta ee jumpers.

    Lagu dabaqi karo silig aluminium ah, silig naxaas ah, silig dahaaran, silig ACSR, iwm, laakiin sidoo kale loogu talagalay silig naxaas lammaane silig naxaas ah, silig aluminium silig aluminium, silig naxaas in kirishbooyada aluminium sida kala guurka ah.

  • NES-B1  Tension clamp

    NES-B1 xajin kacsanaan ah

    Qalabku wuxuu ka kooban yahay jirka ugu muhiimsan, jeex iyo giraanta wax lagu qaado ee la saari karo lana hagaajin karo.

    Qalabka barroosinka ah ee hal-core waxaa loogu talagalay in lagu taageero fariinta pneumatic-ka iyo jeexjeexa si toos ah ayaa loo hagaajin karaa. Silig ama fiilada laambada waddada oo ay weheliso hogaanka

    Qalab

    Xakamaynta waxay ka samaysan yihiin polymers u adkaysta cimilada iyo UV-ga ama jirka aluminium aluminium ah oo leh koofiyadaha alxanka polymer.

    Usha isku xidhka ah ee la hagaajin karo oo ka samaysan birta galvanized-kululeed (FA) ama bir aan daahin (SS).

  • NXJ Aluminum Tension Clamp

    NXJ Aluminium Xannibaadda

    Taxanaha NXJ wuxuu ku habboon yahay xadhkaha dahaarka cidhiidhiga ah ee 20kV anteenada dahaarka aluminium xudunta u ah siliga JKLYJ ama laba daraf oo hagaajinaya oo adkeynaya dahaarka anteenada.