Online Exporter C Type Wedge Clamp - Ampact clamp installation tool – Waxun
Online Exporter C Type Wedge Clamp - Ampact clamp installation tool – Waxun Detail:
Installation Steps
1. Insert the conductor and the wedge end into the groove until to the marking line.
2. Put The clamp on the gun seat and locate it, with wire thread insert. Make sure the end of the gun tightly top the wedge.
3. Remove the back cover of the gun and load the bullet core. Then install the back cover and tighten it.
4. Pull the rear cable to the right place and press the button. Bullet core firing,The push rod will push the wedge core into the
inner of the clamp
5. Remove the ejection gun and unscrew the rear cover, taking the bullet core out. Clean the inner and outer suface of the
tools, with prevention oil and put in the tool case.
Product detail pictures:
Related Product Guide:
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for Online Exporter C Type Wedge Clamp - Ampact clamp installation tool – Waxun, The product will supply to all over the world, such as: Norwegian, Sheffield, Chile, We warmly welcome you to come to visit us personally. We hope to establish a long-term friendship based on equality and mutual benefit. If you want to get in touch with us, please do not hesitate to call. We will be your best choice.
By Chris from Singapore - 2017.09.22 11:32
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Martha from Peru - 2017.07.07 13:00
