OEM manufacturer Tension Splice Connector - AUTOMATIC SPLICE – Waxun
OEM manufacturer Tension Splice Connector - AUTOMATIC SPLICE – Waxun Detail:
| Automatic splice connector | |||||
| Type | AAAC(mm²) | Overhead insulated wire (mm²) | ACSR(mm²) | Diameter range （mm） | Color |
| GL-401 | 4.68-6.7 | Blue | |||
| GL-402A | 16 | 16 | 16 | 5.59-6.35 | Red |
| GL-4042A | 35 | 35 | 35 | 5.59-8.13 | Red |
| GL-404A | 35 | 35 | 35 | 5.84-8.60 | Red |
| GL-406A | 50 | 50 | 50 | 9.02-10.16 | Yellow |
| GL4076A | 9.02-11.94 | Yellow | |||
| GL-407 | 70 | 70 | 70 | 10.16-11.94 | Black |
| GL-408 | 95 | 95 | 95 | 11.43-13.46 | Black |
| GL-4098 | 11.43-15.11 | Black | |||
| GL-409A | 120 | 120 | 120 | 12.83-15.11 | Black |
| GL-410 | 150 | 150 | 150 | 15.32-16.92 | Green |
| GL-411 | 150 | 150 | 150 | 16.74-18.39 | Green |
| GL-412 | 185 | 185 | 185 | 18.34-20.19 | White |
| GL-413 | 240 | 240 | 240 | 19.81-21.79 | White |
| GLT-1316A | —— | —— | 120 | —— | Natural color |
| GLT-1317A | —— | —— | 150 | —— | |
| GLT-1319A | —— | —— | 240 | —— | Blue |
| GLT-1333A+ | 300 | Please consult us | 240 | 21.34-23.37 | Natural color |
| GLT-1355A+ | 300 | Please consult us | 23.80-24.80 | Natural color | |
| GLT-1385A+ | 400 | Please consult us | 25.3-26.19 | Natural color | |
| GLT-1441A+ | 500 | Please consult us | 27.94-28.95 | Red | |
Overview
Aluminum Automatic Splice cable connector is suitable for maintenance and repair of broken line or new line.A tension-dependent device in which the line is installed with at least 10% tension of the rated strength of the wire to ensure a reliable electrical connection, and the current is transmitted to the other end through the wire clip of the wire. Taper type automatic quick connector (full tension automatic connector)
Feature
1.It can withstand the full strength of the wire itself
2.Hammer housing design ensures high strength adhesion to the wire
3.The inner wire clip is embedded into the inner wire
4.It can provide conductivity not lost to the conductor
5.The wire clip can conduct current to the housing with higher conductivity
6.The clamping jaws of the wire clip can penetrate the residual oxide layer on the wire surface
7.Large contact points help dissipate heat
8.The meshing metal clamp maintains good electrical conductivity under various conditions of tension variation
9.No special tools for installation, no crimping operation
10.Convenient for live work installation
11.The installation steps are simplified and the safety of operation is greatly improved
Installation Guide
1. Remove the oxide skin with the conductor brush.
2. Be sure the conductor is clean,straight, free of burrs
3.Measure the the length from the knurl end to the end of funnel guide, then marked.
4. Steady inserting the conductor to the center stop. After that make sure the wire is fixed.
Product detail pictures:
Related Product Guide:
Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for OEM manufacturer Tension Splice Connector - AUTOMATIC SPLICE – Waxun, The product will supply to all over the world, such as: Durban, Suriname, Pakistan, We have advanced production technology, and pursuit innovative in products. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you must be willing to become partners with us. Looking forward to your inquiry.
By trameka milhouse from Honduras - 2018.06.30 17:29
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Athena from Danish - 2018.02.21 12:14
