OEM manufacturer Tension Splice Connector - Automatic Splice – Waxun
OEM manufacturer Tension Splice Connector - Automatic Splice – Waxun Detail:
|
Automatic splice connector |
|||||
|
Type |
AAAC(mm²) |
Overhead insulated wire (mm²) |
ACSR(mm²) |
Diameter range （mm） |
Color |
|
GL-401 |
4.68-6.7 |
Blue |
|||
|
GL-402A |
16 |
16 |
16 |
5.59-6.35 |
Red |
|
GL-4042A |
25 |
25 |
25 |
5.59-8.13 |
Red |
|
GL-404A |
35 |
35 |
35 |
5.84-8.60 |
Red |
|
GL-406A |
50 |
50 |
50 |
9.02-10.16 |
Yellow |
|
GL4076A |
9.02-11.94 |
Yellow |
|||
|
GL-407 |
70 |
70 |
70 |
10.16-11.94 |
Black |
|
GL-408 |
95 |
95 |
95 |
11.43-13.46 |
Black |
|
GL-4098 |
11.43-15.11 |
Black |
|||
|
GL-409A |
120 |
120 |
120 |
12.83-15.11 |
Black |
|
GL-410 |
150 |
150 |
150 |
15.32-16.92 |
Green |
|
GL-411 |
150 |
150 |
150 |
16.74-18.39 |
Green |
|
GL-412 |
185 |
185 |
185 |
18.34-20.19 |
White |
|
GL-413 |
240 |
240 |
240 |
19.81-21.79 |
White |
|
GLT-1316A |
—— |
—— |
120 |
—— |
Natural color |
|
GLT-1317A |
—— |
—— |
150 |
—— |
|
|
GLT-1319A |
—— |
—— |
240 |
—— |
Blue |
|
GLT-1333A+ |
300 |
Please consult us |
240 |
21.34-23.37 |
Natural color |
|
GLT-1355A+ |
300 |
Please consult us |
23.80-24.80 |
Natural color |
|
|
GLT-1385A+ |
400 |
Please consult us |
25.3-26.19 |
Natural color |
|
|
GLT-1441A+ |
500 |
Please consult us |
27.94-28.95 |
Red |
|
Overview
Aluminum Automatic Splice cable connector is suitable for maintenance and repair of broken line or new line.A tension-dependent device in which the line is installed with at least 10% tension of the rated strength of the wire to ensure a reliable electrical connection, and the current is transmitted to the other end through the wire clip of the wire. Taper type automatic quick connector (full tension automatic connector)
Feature
1.It can withstand the full strength of the wire itself
2.Hammer housing design ensures high strength adhesion to the wire
3.The inner wire clip is embedded into the inner wire
4.It can provide conductivity not lost to the conductor
5.The wire clip can conduct current to the housing with higher conductivity
6.The clamping jaws of the wire clip can penetrate the residual oxide layer on the wire surface
7.Large contact points help dissipate heat
8.The meshing metal clamp maintains good electrical conductivity under various conditions of tension variation
9.No special tools for installation, no crimping operation
10.Convenient for live work installation
11.The installation steps are simplified and the safety of operation is greatly improved
Installation Guide
1. Remove the oxide skin with the conductor brush.
2. Be sure the conductor is clean,straight, free of burrs
3.Measure the the length from the knurl end to the end of funnel guide, then marked.
4. Steady inserting the conductor to the center stop. After that make sure the wire is fixed.
Product detail pictures:
Related Product Guide:
Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for OEM manufacturer Tension Splice Connector - Automatic Splice – Waxun, The product will supply to all over the world, such as: Jordan, Haiti, Nigeria, we've got all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Danny from Honduras - 2018.10.09 19:07
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Megan from Peru - 2018.12.28 15:18
