Hot sale Single Wire Preformed Guy Grip Dead End - Preformed guy grip with dead end clamp – Waxun
Hot sale Single Wire Preformed Guy Grip Dead End - Preformed guy grip with dead end clamp – Waxun Detail:
Component
Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.
Characteristic
1. Stress is distributed equally, without stress focus. It can protect optical cables very well.
2. Under the condition of not exceeding the intensity of cable’s side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. The grip power for the cable is not less than 95% of rating’s pulling resisting intensity of the optical cable, completely satisfying the needs of setting up the cable.
Conditions for the usage
1. Terminal poles/towers;
2. Poles/towers with corner angles greater than 25°
3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.
Intensity
According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.
| ANZ cable dead end clamp | |||||||||
| Type | Cable Dia.（mm） | Holding strength（kn） | Span（m） | Length of outer（mm） | Length of endothecium（mm） | Weight（kg） | Universal scheme | ||
| Chevis (Eye chain link) | Thimble | Anchor shackle | |||||||
| ANZ 0940 020 | 8.6-9.4 | 20 | 200/300 | 800 | 1100 | 0.88 | ZH-7 | TC04 | U-7 |
| ANZ 1010 020 | 9.5-10.1 | 20 | 200/300 | 800 | 1100 | 1.02 | ZH-7 | TC04 | U-7 |
| ANZ 1070 020 | 10.2-10.7 | 20 | 200/300 | 800 | 1100 | 1.06 | ZH-7 | TC04 | U-7 |
| ANZ 1140 020 | 10.8-11.4 | 20 | 200/300 | 800 | 1100 | 1.08 | ZH-7 | TC04 | U-7 |
| ANZ 1220 020 | 11.5-12.2 | 20 | 200/300 | 800 | 1100 | 1.35 | ZH-7 | TC07 | U-7 |
| ANZ 1290 020 | 12.3-12.9 | 20 | 200/300 | 800 | 1100 | 1.38 | ZH-7 | TC07 | U-7 |
| ANZ 1370 020 | 13.0-13.7 | 20 | 200/300 | 800 | 1100 | 1.54 | ZH-7 | TC07 | U-7 |
| ANZ 1460 020 | 13.8-14.6 | 20 | 200/300 | 800 | 1100 | 1.57 | ZH-7 | TC07 | U-7 |
| ANZ 1550 020 | 14.7-15.5 | 20 | 200/300 | 800 | 1100 | 1.6 | ZH-7 | TC07 | U-7 |
| ANZ 0940 030 | 8.6-9.4 | 30 | 300/400 | 1100 | 1400 | 1.17 | ZH-7 | TC07 | U-7 |
| ANZ 1010 030 | 9.5-10.1 | 30 | 300/400 | 1100 | 1400 | 1.35 | ZH-7 | TC07 | U-7 |
| ANZ 1070 030 | 10.2-10.7 | 30 | 300/400 | 1100 | 1400 | 1.4 | ZH-7 | TC07 | U-7 |
| ANZ 1140 030 | 10.8-11.4 | 30 | 300/400 | 1100 | 1400 | 1.43 | ZH-7 | TC07 | U-7 |
| ANZ 1220 030 | 11.5-12.2 | 30 | 300/400 | 1100 | 1400 | 1.8 | ZH-7 | TC07 | U-7 |
| ANZ 1290 030 | 12.3-12.9 | 30 | 300/400 | 1100 | 1400 | 1.84 | ZH-7 | TC07 | U-7 |
| ANZ 1370 030 | 13.0-13.7 | 30 | 300/400 | 1100 | 1400 | 2.04 | ZH-7 | TC07 | U-7 |
| ANZ 1460 030 | 13.8-14.6 | 30 | 300/400 | 1100 | 1400 | 2.08 | ZH-7 | TC07 | U-7 |
| ANZ 1550 030 | 14.7-15.5 | 30 | 300/400 | 1100 | 1400 | 2.12 | ZH-7 | TC07 | U-7 |
| ANZ 1220 040 | 11.5-12.2 | 40 | 400/500 | 1260 | 1800 | 2.14 | PD-7 | TC07 | U-7/2 |
| ANZ 1290 040 | 12.3-12.9 | 40 | 400/500 | 1260 | 1800 | 2.19 | PD-7 | TC07 | U-7/2 |
| ANZ 1370 050 | 13.0-13.7 | 40 | 400/500 | 1260 | 1800 | 2.44 | PD-7 | TC07 | U-7/2 |
| ANZ 1460 040 | 13.8-14.6 | 40 | 400/500 | 1260 | 1800 | 2.49 | PD-7 | TC07 | U-7/2 |
| ANZ 1550 040 | 14.7-15.5 | 40 | 400/500 | 1260 | 1800 | 2.54 | PD-7 | TC07 | U-7/2 |
| ANZ 1650 040 | 15.6-16.5 | 40 | 400/500 | 1260 | 1800 | 2.92 | PD-7 | TC07 | U-7/2 |
| ANZ 1370 050 | 13.0-13.7 | 50 | 500/600/700 | 1400 | 2000 | 2.7 | PD-7 | TC07 | U-7/2 |
| ANZ 1460 050 | 13.8-14.6 | 50 | 500/600/700 | 1400 | 2000 | 2.76 | PD-7 | TC07 | U-7/2 |
| ANZ 1550 050 | 14.7-15.5 | 50 | 500/600/700 | 1400 | 2000 | 2.81 | PD-7 | TC07 | U-7/2 |
| ANZ 1650 050 | 15.6-16.5 | 50 | 500/600/700 | 1400 | 2000 | 3.23 | PD-7 | TC07 | U-7/2 |
| ANZ 1370 060 | 13.0-13.7 | 60 | 600/700/800 | 1560 | 2200 | 2.98 | PD-7 | TC07 | U-7/2 |
| ANZ 1460 060 | 13.8-14.6 | 60 | 600/700/800 | 1560 | 2200 | 3.04 | PD-7 | TC07 | U-7/2 |
| ANZ 1550 060 | 14.7-15.5 | 60 | 600/700/800 | 1560 | 2200 | 3.11 | PD-7 | TC07 | U-7/2 |
| ANZ 1650 060 | 15.6-16.5 | 60 | 600/700/800 | 1560 | 2200 | 3.57 | PD-7 | TC07 | U-7/2 |
| ANZ 1460 070 | 13.8-14.6 | 70 | 700/800/900 | 1600 | 2400 | 3.2 | PD-7 | TC07 | U-7/2 |
| ANZ 1550 070 | 14.7-15.5 | 70 | 700/800/900 | 1600 | 2400 | 3.27 | PD-7 | TC07 | U-7/2 |
| ANZ 1650 070 | 15.6-16.5 | 70 | 700/800/900 | 1600 | 2400 | 3.77 | PD-7 | TC07 | U-7/2 |
| ANZ 1750 070 | 16.6-17.5 | 70 | 700/800/900 | 1600 | 2400 | 4.12 | PD-7 | TC07 | U-7/2 |
| ANZ 1870 070 | 17.6-18.7 | 70 | 700/800/900 | 1600 | 2400 | 4.64 | PD-7 | TC07 | U-7/2 |
| ANZ 1550 080 | 14.7-15.5 | 80 | 800/900/1000 | 2000 | 3000 | 4.08 | PD-10 | TC-10 | U-10/2 |
| ANZ 1650 080 | 15.6-16.5 | 80 | 800/900/1000 | 2000 | 3000 | 4.71 | PD-10 | TC-10 | U-10/2 |
| ANZ 1750 080 | 16.6-17.5 | 80 | 800/900/1000 | 2000 | 3000 | 5.14 | PD-10 | TC-10 | U-10/2 |
| ANZ 1870 080 | 17.6-18.7 | 80 | 800/900/1000 | 2000 | 3000 | 5.79 | PD-10 | TC-10 | U-10/2 |
| ANZ 1650 100 | 15.6-16.5 | 100 | 1000 | 2800 | 4000 | 7.02 | PD-10 | TC-10 | U-10/2 |
| ANZ 1750 100 | 16.6-17.5 | 100 | 1000 | 2800 | 4000 | 7.22 | PD-10 | TC-10 | U-10/2 |
| ANZ 1870 100 | 17.6-18.7 | 100 | 1000 | 2800 | 4000 | 7.91 | PD-10 | TC-10 | U-10/2 |
Product detail pictures:
Related Product Guide:
It adheres on the tenet "Honest, industrious, enterprising, innovative" to develop new items frequently. It regards buyers, success as its very own success. Let us produce prosperous future hand in hand for Hot sale Single Wire Preformed Guy Grip Dead End - Preformed guy grip with dead end clamp – Waxun, The product will supply to all over the world, such as: Zurich, UK, Monaco, We are committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.
By Miguel from Grenada - 2017.02.14 13:19
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Jamie from Lithuania - 2018.09.23 17:37
