Factory Cheap Hot Dead End Wedge Type Insulation Strain Clamp - Ampact clamp installation tool – Waxun
Factory Cheap Hot Dead End Wedge Type Insulation Strain Clamp - Ampact clamp installation tool – Waxun Detail:
Installation Steps
1. Insert the conductor and the wedge end into the groove until to the marking line.
2. Put The clamp on the gun seat and locate it, with wire thread insert. Make sure the end of the gun tightly top the wedge.
3. Remove the back cover of the gun and load the bullet core. Then install the back cover and tighten it.
4. Pull the rear cable to the right place and press the button. Bullet core firing,The push rod will push the wedge core into the
inner of the clamp
5. Remove the ejection gun and unscrew the rear cover, taking the bullet core out. Clean the inner and outer suface of the
tools, with prevention oil and put in the tool case.
Product detail pictures:
Related Product Guide:
We always get the job done to be a tangible staff to ensure that we can easily offer you the best high-quality and the greatest value for Factory Cheap Hot Dead End Wedge Type Insulation Strain Clamp - Ampact clamp installation tool – Waxun, The product will supply to all over the world, such as: Monaco, Cyprus, Salt Lake City, Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation and sincerely welcome you to join us. In a word, when you choose us, you choose a perfect life. Welcome to visit our factory and welcome your order! For further inquiries, please do not hesitate to contact us.
By Austin Helman from Russia - 2018.09.21 11:44
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Kama from Malawi - 2018.06.18 19:26
