Aluminium guy waya dead end guy ejide strandvise

Nkọwa dị mkpirikpi:

GUY Strand DEAD END, ọ bụ ngwa nwere ụdị cone nke a na-edobekarị na ala nke okporo osisi nnyefe.Ebe a na-ejikọta ya na alawaya nwoke.A na-ejikwa ya na ahịrị ndị dị n'elu ebe a na-ejikọta ya na ngwa ndị nwụrụ anwụ.Ọrụ ya bụ isi bụ ịkwụsị waya guy na eriri elu.

Emebere eriri eriri iji tinye n'elu eriri site na iji ụkpụrụ ọnyà mkpịsị aka.N'ebe a, mmiri na-arụ ọrụ n'agba ya na eriri wee tọọ ngwaọrụ ahụ.A na-ahapụ agba ndị ahụ ka ha ghara ibuli elu.

Ihe dị mma gbasara strand vise bụ na ọ nweghị mkpụrụ maka ịgbanye torque na eriri.Nke a pụtara na ọ dịghị mkpa ịpịkọta ya na aka uwe.

Nrụpụta siri ike nke eriri vise na-eme ka ọ bụrụ ihe a pụrụ ịdabere na ya maka ọtụtụ ngwa ngwa yana maka ebe dị iche iche.Ọ na-egosipụta nchara galvanized nke na-abụghị naanị ike mana echekwara ya pụọ ​​​​na mbibi kemịkalụ.

Enwere ike iji eriri dị iche iche gụnyere alum weld, galvanized, aluminized, na EHS, strand steel.

The guy strand nwụrụ anwụ ọgwụgwụ imewe na-eme ka ọ dakọtara na a dịgasị iche iche nke ulo oru strands.Ọ nwere ike ịkwado ọtụtụ wires ekele maka nhazi bale zuru ụwa ọnụ.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nleba anya

A na-eji strandvise & Automatic strand deadend &Splice bụ isi site na ekwentị na ụlọ ọrụ eletrik iji kwụsị eriri ma ọ bụ mkpanaka n'elu osisi na n'anya arịlịka.Maka nkwusioru Strand, Guy Strand na Static Waya.A na-eji kwụsị ikuku support strand ozi, na n'elu na ala nsọtụ ala ụmụ okorobịa.All-Grades Automatic strand deadend bụ maka ndị 7-waya strands na siri ike wires mara site ụdị aha, mkpuchi, ụdị ígwè, na n'ime dayameta ranges depụtara, ma ọ bụghị 3-waya strand na ọ bụghị Alumnoweld.Akwadoro iji na Galvanized zinc mkpuchi, Aluminized, na Bethalume.

Ngwa:• N'ihi na deadend ngwa na elu ma ọ bụ ala guy waya • "Universal Grade" na-atụ aro ka iji na Alumoweld, Aluminized, EHS na Galvanized Steel • "All grades" ka akwadoro maka ojiji na Common Grade, Siemens-Martin, High Strength Utility Grade, eriri igwe galvanized na aluminum

atụmatụ:

  • Na-anabata oke waya obosara
  • Nwere ike ijide opekata mpe 90% RBM
  • Enwere ike iji eriri igwe dị iche iche mee ihe
  • Nhazi dị mfe maka ntinye dị mfe na ngwa ngwa
  • Kwesịrị ekwesị ma n'elu na ala guy wires
  • Nhazi nke yiri cone na-enye ana achi achi na ha nwere njide siri ike na eriristrandvise figure

 

1. Tinye arịlịka bail n'akụkụ anya arịlịka ma pịnye ụkwụ mgbapụta ọnụ ka ọ tụpụ.
yok n'elu mgbapụta ahụ agwụ.Lee FIG 1
2. Wụnye mgbapụta ogologo oge n'ime ntị mpụta nke yok wee jikọọ agbụ ahụ
nkoli elu.Lee FIG 2
3. Tinye yinye hoist na Ihọd waya na-etinye erughị ala iji wepụ slack na Ihọd waya.
4. Wụnye unit gripping site na ịtinye site na yok.** Ewepụla plọg nwere agba *** Lee FIG 3
5.Mgbe ị na-etinye ihe nkedo na-ejide ya site na yok, na-atụgharị ihe na-ejide ya, ruo mgbe ihe na-ejide ya.
"afụ" na-eche ihu n'èzí, iji kpochie ya na yok.Lee FIG 3b
6. Iji hụ na nrụnye kwesịrị ekwesị na ịrụ ọrụ ogologo oge na-eme ka njedebe dị ọcha ịkpụ, na-enweghị
na-agba agba, ma ha adịghị atụ egwu;USB kwesịrị ịdị ogologo ma tinye ya (enweghị mgbagha, kinks, ma ọ bụ akụkụ)
7.Insert guy waya n'ịhụ na niile strands banye pilot cup, mgbe ahụ, inupụ guy waya site gripping
nkeji ruo mgbe ọ ga-ewepụ plugand nwere agba na-apụ n'otu akụkụ ahụ.Lee FIG 4
8.Guide waya ikpochapụ anya arịlịka.Lee foto 4b
9.Finish echichi site n'ịgbanwe eriri Ihọd ka chọrọ esemokwu.
10. Lelee nrụnye anya na-ewepụ ma wepụ elu.Lee foto 5
• usoro GDE nwụrụ anwụ bụ 90% RBS MAX
Ntuziaka nwụnye ndị a bụ naanị maka ntụnye aka.Ekwesịrị ịgbaso ntuziaka nchekwa niile.Ntuziaka ndị a
emechiela ụkpụrụ ịba uru.
automatic splice 2

  • Nke gara aga:
  • Osote:

  • Ngwaahịa ndị emetụtara