I-Preformed Dead End Guy Grip
Uhlolojikelele
I-Tension Clamps enzelwe ukuxhuma izintambo ze-ADSS nezigxobo/imibhoshongo.Ama-armor rods anganikeza ukuvikeleka kanye ne-cushioning ezintamboni ze-ADSS.Idizayini ekhethekile ye-Preformed rods yenza isiqiniseko sokuthi i-Tension Clamp ayikwazi ukubangela ukucindezeleka okungadingekile ezintamboni ze-ADSS, ukuze kuqinisekiswe ukuphila okuvamile kwesistimu yezintambo.
I-Preformed Tension Clamp iklanyelwe ukuxhuma izintambo ze-ADSS nezigxobo/imibhoshongo.Ama-armor rods anganikeza ukuvikeleka kanye ne-cushioning ezintamboni ze-ADSS.Idizayini ekhethekile ye-Preformed rods yenza isiqiniseko sokuthi i-Tension Clamp ayikwazi ukubangela ukucindezeleka okungadingekile ezintamboni ze-ADSS, ukuze kuqinisekiswe ukuphila okuvamile kwesistimu yezintambo.
I-Tension Clamp yakhelwe ukuxhuma izintambo ze-OPGW nezigxobo eziqinile (noma imibhoshongo).Ama-armor rods angavikela futhi anikeze ukugudluzwa kwezintambo ze-OPGW.Idizayini ekhethekile ye-Armor rods yenza isiqiniseko sokuthi I-Tension Clamp ayikwazi ukudala ingcindezi engadingekile ezintamboni ze-OPGW, ukuze kuqinisekiswe ukuphila okujwayelekile kwesistimu yekhebula.
Ukufanisa izingxenyekazi zekhompuyutha
Indandatho emise okwenhliziyo (isithombe 1-1) (ithebula 1-1) (umbuthano 1-2) (ithebula 1-2)
Umzimba: I-Hot-dip galvanized ductile iron Bolt: Yenziwe ngensimbi eyakhiwe ngediphu eshisayo
Iphinikhodi yokuhlukanisa: ithusi elingenasici
Indandatho emise okwenhliziyo
| Inombolo yomkhiqizo | Uphawu oluyisethenjwa | Amandla okuphuka | isisindo | Usayizi (mm) | ||||
| A | B | C | D | E | ||||
| I-TC-12 | I-TC-12 | 120 | 0.9 | 107 | 48 | 24 | 57 | M16 |
| I-TC-16 | I-TC-16 | 156 | 1.7 | 124 | 57 | 25.4 | 64 | M18 |
| I-TC-16 | I-TC-16 | 156 | 1.7 | 124 | 57 | 25.4 | 64 | M16 |
Indandatho yenhliziyo
| Inombolo yomkhiqizo | Uphawu oluyisethenjwa | Amandla okuphuka | isisindo | Usayizi (mm) | |||||
| A | B | C | D | E | |||||
| I-TC-05 | I-TC-05 | 50 | 0.33 | 60 | 45 | 20 | 40 | 16 | |
| TC-07 | TC-07 | 70 | 0.44 | 60 | 45 | 20 | 42 | 16 | |
Qaphela
Ungavaleli phezu kweziqeshana zocingo.Ukuxhakathisa izintambo ngaphambi nangemuva kwe-clamp kuvunyelwe:
Ungasebenzisi izinsimbi zocingo ezintambo ezingaphansi;
▪ Ngemva kokufaka kokuqala, ungaphinde usebenzise i-wire clamp:
▪ Isiqondiso sokuzungezisa kwe-wire clamp kanye nocingo kufanele kufane.I-clamp evamile isesandleni sokudla, uma udinga imikhiqizo yesandla sobunxele, sicela uthintane nenkampani.
Ithebula lokukhetha le-strain clamp yamakhondaktha afakwe ngaphambili asontekile (1)
| Inombolo yomkhiqizo | Ububanzi bobubanzi bentambo obusebenzayo (mm) | Imodeli yocingo esebenzayo ngaphansi kwe-1kV I-GB12527-90 | Imodeli yezintambo ezisebenzayo ngaphansi kuka-10kV Ukufakwa kwe-GB 14049-93 okuncane | Ubude bereferensi (mm) | Ikhodi yombala | Izingxenyekazi zekhompuyutha ezifanayo ozikhethela zona | |
| Okuncane kakhulu | esiphezulu | ||||||
| I-DN-3510 | 5.82 | 6.53 | 10 | 460 | iwolintshi | I-TC-05 | |
| I-DN-3511 | 6.55 | 7.34 | 16 | 530 | ophuzi | ||
| I-DN-3513 | 8.28 | 9.25 | 25 | 690 | eluhlaza | ||
| I-DN-3514 | 9.26 | 10.39 | 35 | 690 | ophuzi | ||
| I-DN-3515 | 10.40 | 11.68 | 50 | 740 | eluhlaza okwesibhakabhaka | ||
| I-DN-3516 | 11.69 | 13.11 | 70 | 25 | 790 | iwolintshi
| |
| 35 | |||||||
| I-DN-3517 | 13.12 | 14.66 | 50 | 860 | onsomi | ||
| I-DN-3100 | 14.67 | 16.59 | 95 | 70 | 889 | eluhlaza okwesibhakabhaka
| |
| 120 | |||||||
| I-DN-3101 | 16.60 | 18.77 | 150 | 95 | 980 | ebomvu | |
| I-DN-3102 | 18.78 | 21.26 | 185 | 120 | 1016 | Brown
| TC-07 |
| 150 | |||||||
| I-DN-3103 | 21.27 | 24.05 | 240 | 185 | 1016 | eluhlaza | I-TC-12 |
| I-DN-3104 | 24.06 | 27.20 | 240 | 1016 | mnyama | ||
| 300 | |||||||
Ithebula 1-4 Ithebula lokukhetha le-strain clamp yamakhondaktha afakwe ngaphambili asontekile (2)
| Inombolo yomkhiqizo | Ububanzi bobubanzi bentambo obusebenzayo (mm) | Imodeli yocingo esebenzayo ngaphansi kwe-1kV I-GB12527-90 | Imodeli yezintambo ezisebenzayo ngaphansi kuka-10kV Ukufakwa kwe-GB 14049-93 okuncane | Ubude bereferensi (mm) | Ikhodi yombala | |
| Ubuncane | Ubuningi | |||||
| I-NL-35/JY | 14.67 | 16.59 | 35 | 889 | eluhlaza okwesibhakabhaka
| I-TC-05 |
| I-NL-50/JY | 50 | |||||
| I-NL-70/JY | 16.60 | 18.77 | 70 | 980 | ebomvu | |
| I-NL-95/JY | 18.78 | 21.26 | 95 | 1016 | Brown
| TC-07 |
| I-NL-120/JY | 120 | |||||
| I-NL-150/JY | 21.27 | 24.05 | 150 | 1016 | eluhlaza | I-TC-12 |
| I-NL-185/JY | 24.06 | 27.20 | 185 | 1016 | mnyama
| |
| I-NL-240/JY | 240 | |||||
| I-NL-300/JY | 27.21 | 30.78 | 300 | 1016 | onsomi | |
Qaphela: Incazelo yezinhlamvu nezinombolo kumodeli: N- strain clamp;Uhlobo olusontelwe ngaphambili lwe-L- spiral: “-” imodeli yentambo esebenzayo i-JY- insulated wire.
Ukukhethwa kwemodeli ye-TCB yezingxenyekazi zekhompuyutha ezifanayo ozikhethela kuzo kuhlobene namandla okuphuka okulinganiselwe kwentambo.
Ukukhethwa kwe-strain clamp kungaphansi kobubanzi bangempela bocingo.
Ithebula 1-5 Ithebula lokukhetha le-clamp ye-conductor eboshwe ngaphambilini (yensimbi ewumgogodla we-aluminium exhunywe ucingo)
| Inombolo yomkhiqizo | Ububanzi bobubanzi bentambo obusebenzayo (mm) | Imodeli yocingo esebenzayo ngaphansi kwe-1kV I-GB12527-90 | Ubude bereferensi (mm) | Isisindo se-clamp (kg) | Ikhodi yombala | Izingxenyekazi zekhompuyutha ezifanayo ozikhethela zona | |
| Ubuncane | esiphezulu | ||||||
| NL-16/3 | 5.17 | 5.79 | 16/3 | 444 | 0.1 | Brown | I-TC-05 |
| NL-25/4 | 6.54 | 7.34 | 25/4 | 546 | 0.1 | ophuzi | |
| I-NL-35/6 | 7.35 | 8.26 | 35/6 | 622 | 0.2 | ebomvu | |
| I-NL-50/8 | 9.26 | 10.39 | 50/8 | 685 | 0.2 | ophuzi | |
| I-NL-70/10 | 10.40 | 11.68 | 70/10 | 736 | 0.3 | eluhlaza okwesibhakabhaka | |
| NL95/15 | 13.12 | 14.66 | 95/15 | 876 | 0.6 | ebomvu
| TC-07 |
| I-NL-95/20 | 95/20 | ||||||
| I-NL-120/7 | 120/7 | ||||||
| I-NL-120/20 | 14.67 | 16.59 | 120/20 | 889 | 0.8 | mnyama
| |
| I-NL-120/25 | 120/25 | I-TC-12 | |||||
| I-NL-150/8 | 150/8 | ||||||
| I-NL-150/20 | 16.60 | 18.77 | 150/20 | 1016 | 1.1 | eluhlaza | |
| I-NL-150/25 | 150/25 | ||||||
| I-NL-150/35 | 150/35 | ||||||
| I-NL-185/10 | 185/10 | ||||||
| I-NL-185/25 | 18.78 | 21.26 | 185/25 | 1155 | 1.7 | iwolintshi
| |
| I-NL-185/30 | 185/30 | ||||||
| I-NL-185/45 | 185/45 | ||||||
| I-NL-210/10 | 210/10 | ||||||
| I-NL-210/25 | 210/25 | ||||||
| I-NL-210/35 | 210/35 | ||||||
| I-NL-210/50 | 210/50 | ||||||
| I-NL-240/30 | 21.27 | 24.05 | 240/30 | 1270 | 2.3 | eluhlaza okwesibhakabhaka
| I-TC-16 |
| I-NL-240/40 | 240/40 | ||||||
| I-NL-300/15 | 300/15 | ||||||
| I-NL-300/20 | 300/20 | ||||||
| I-NL-300/25 | 24.06 | 27.20 | 300/25 | 1442 | 3.0 | Brown | |
| I-NL-300/40 | 300/40 | ||||||
| I-NL-300/50 | 300/50 | ||||||
Qaphela: Incazelo yezinhlamvu nezinombolo kumodeli: I-N- tension clamp;I-L- spiral pre-twisted type;ngemva kokuthi “-” imodeli yocingo esebenzayo;I-LGJ- steel core aluminium stranded wire.
Leli thebula libonisa kuphela imikhiqizo ethile.Uma udinga imikhiqizo eneminye imininingwane, sicela uthintane nenkampani.
Empeleni, izinsimbi zokuxilonga zekhondatha esonteke ngaphambili zisetshenziswa kuphela emigqeni ephezulu enamazinga kagesi angu-110kV nangaphansi.
Ithebula 1-6 Ithebula lokukhetha le-clamp ye-tension yocingo esontekile (ocingweni oluxhumeke nge-aluminium)
| Inombolo yomkhiqizo | Ububanzi bobubanzi bentambo obusebenzayo (mm) | Uhlobo lwezintambo ezisebenzayo (GB1179-83) I-Aluminium stranded wire (LJ) | Ubude bereferensi (mm) | Isisindo se-clamp | Ikhodi yombala | Izingxenyekazi zekhompuyutha ezifanayo ozikhethela zona | |
| Ubuncane | Ubuningi | ||||||
| I-NL-16/LJ | 4.62 | 5.16 | 16 | 406 | 0.1 | eluhlaza okwesibhakabhaka | I-TC-05 |
| I-NL-25/LJ | 5.80 | 6.53 | 25 | 444 | 0.1 | iwolintshi | |
| I-NL-35/LJ | 7.35 | 8.26 | 35 | 622 | 0.2 | ebomvu | TC-07 |
| I-NL-50/LJ | 8.27 | 9.25 | 50 | 685 | 0.2 | eluhlaza | I-TC-12 |
| I-NL-70/LJ | 10.40 | 11.68 | 70 | 736 | 0.4 | eluhlaza okwesibhakabhaka | |
| I-NL-95/LJ | 11.69 | 13.22 | 95 | 800 | 0.4 | iwolintshi | |
| I-NL-120/LJ | 13.12 | 14.66 | 120 | 876 | 0.6 | ebomvu | |
| I-NL-150/LJ | 14.67 | 16.59 | 150 | 889 | 0.8 | mnyama | |
| I-NL-185/LJ | 16.60 | 18.77 | 185 | 1016 | 1.1 | eluhlaza | |
| I-NL-210/LJ | 16.60 | 18.77 | 210 | 1016 | 1.1 | eluhlaza | |
| I-NL-240/LJ | 18.78 | 21.26 | 240 | 1155 | 1.7 | iwolintshi | |
| I-NL-300/LJ | 21.27 | 24.05 | 300 | 1270 | 2.3 | eluhlaza okwesibhakabhaka | I-TC-16 |
| I-NL-400/LJ | 24.06 | 27.20 | 400 | 1422 | 3.0 | Brown | |
| I-NL-500/LJ | 27.21 | 30.78 | 500 | 1651 | 4.9 | iwolintshi | |
Qaphela: Incazelo yezinhlamvu nezinombolo kumodeli: N- tensile clamp;I-L- spiral pre-twisted type: “Eyodwa” imodeli yocingo esebenzayo;LJ- i-aluminium stranded wire.
Leli thebula libonisa kuphela imikhiqizo ethile.Uma udinga imikhiqizo eneminye imininingwane, sicela uthintane nenkampani.
