Preformed guy grip with dead end clamp

Component

Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.

Characteristic

1. Stress is distributed equally, without stress focus. It can protect optical cables very well.
2. Under the condition of not exceeding the intensity of cable’s side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. The grip power for the cable is not less than 95% of rating’s pulling resisting intensity of the optical cable, completely satisfying the needs of setting up the cable.

Conditions for the usage

1. Terminal poles/towers;
2. Poles/towers with corner angles greater than 25°
3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.

Intensity

According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.

ANZ cable dead end clamp
Type	Cable Dia.（mm）	Holding strength（kn）	Span（m）	Length of outer（mm）	Length of endothecium（mm）	Weight（kg）	Universal scheme
Type	Cable Dia.（mm）	Holding strength（kn）	Span（m）	Length of outer（mm）	Length of endothecium（mm）	Weight（kg）	Chevis (Eye chain link)	Thimble	Anchor shackle
ANZ 0940 020	8.6-9.4	20	200/300	800	1100	0.88	ZH-7	TC04	U-7
ANZ 1010 020	9.5-10.1	20	200/300	800	1100	1.02	ZH-7	TC04	U-7
ANZ 1070 020	10.2-10.7	20	200/300	800	1100	1.06	ZH-7	TC04	U-7
ANZ 1140 020	10.8-11.4	20	200/300	800	1100	1.08	ZH-7	TC04	U-7
ANZ 1220 020	11.5-12.2	20	200/300	800	1100	1.35	ZH-7	TC07	U-7
ANZ 1290 020	12.3-12.9	20	200/300	800	1100	1.38	ZH-7	TC07	U-7
ANZ 1370 020	13.0-13.7	20	200/300	800	1100	1.54	ZH-7	TC07	U-7
ANZ 1460 020	13.8-14.6	20	200/300	800	1100	1.57	ZH-7	TC07	U-7
ANZ 1550 020	14.7-15.5	20	200/300	800	1100	1.6	ZH-7	TC07	U-7
ANZ 0940 030	8.6-9.4	30	300/400	1100	1400	1.17	ZH-7	TC07	U-7
ANZ 1010 030	9.5-10.1	30	300/400	1100	1400	1.35	ZH-7	TC07	U-7
ANZ 1070 030	10.2-10.7	30	300/400	1100	1400	1.4	ZH-7	TC07	U-7
ANZ 1140 030	10.8-11.4	30	300/400	1100	1400	1.43	ZH-7	TC07	U-7
ANZ 1220 030	11.5-12.2	30	300/400	1100	1400	1.8	ZH-7	TC07	U-7
ANZ 1290 030	12.3-12.9	30	300/400	1100	1400	1.84	ZH-7	TC07	U-7
ANZ 1370 030	13.0-13.7	30	300/400	1100	1400	2.04	ZH-7	TC07	U-7
ANZ 1460 030	13.8-14.6	30	300/400	1100	1400	2.08	ZH-7	TC07	U-7
ANZ 1550 030	14.7-15.5	30	300/400	1100	1400	2.12	ZH-7	TC07	U-7
ANZ 1220 040	11.5-12.2	40	400/500	1260	1800	2.14	PD-7	TC07	U-7/2
ANZ 1290 040	12.3-12.9	40	400/500	1260	1800	2.19	PD-7	TC07	U-7/2
ANZ 1370 050	13.0-13.7	40	400/500	1260	1800	2.44	PD-7	TC07	U-7/2
ANZ 1460 040	13.8-14.6	40	400/500	1260	1800	2.49	PD-7	TC07	U-7/2
ANZ 1550 040	14.7-15.5	40	400/500	1260	1800	2.54	PD-7	TC07	U-7/2
ANZ 1650 040	15.6-16.5	40	400/500	1260	1800	2.92	PD-7	TC07	U-7/2
ANZ 1370 050	13.0-13.7	50	500/600/700	1400	2000	2.7	PD-7	TC07	U-7/2
ANZ 1460 050	13.8-14.6	50	500/600/700	1400	2000	2.76	PD-7	TC07	U-7/2
ANZ 1550 050	14.7-15.5	50	500/600/700	1400	2000	2.81	PD-7	TC07	U-7/2
ANZ 1650 050	15.6-16.5	50	500/600/700	1400	2000	3.23	PD-7	TC07	U-7/2
ANZ 1370 060	13.0-13.7	60	600/700/800	1560	2200	2.98	PD-7	TC07	U-7/2
ANZ 1460 060	13.8-14.6	60	600/700/800	1560	2200	3.04	PD-7	TC07	U-7/2
ANZ 1550 060	14.7-15.5	60	600/700/800	1560	2200	3.11	PD-7	TC07	U-7/2
ANZ 1650 060	15.6-16.5	60	600/700/800	1560	2200	3.57	PD-7	TC07	U-7/2
ANZ 1460 070	13.8-14.6	70	700/800/900	1600	2400	3.2	PD-7	TC07	U-7/2
ANZ 1550 070	14.7-15.5	70	700/800/900	1600	2400	3.27	PD-7	TC07	U-7/2
ANZ 1650 070	15.6-16.5	70	700/800/900	1600	2400	3.77	PD-7	TC07	U-7/2
ANZ 1750 070	16.6-17.5	70	700/800/900	1600	2400	4.12	PD-7	TC07	U-7/2
ANZ 1870 070	17.6-18.7	70	700/800/900	1600	2400	4.64	PD-7	TC07	U-7/2
ANZ 1550 080	14.7-15.5	80	800/900/1000	2000	3000	4.08	PD-10	TC-10	U-10/2
ANZ 1650 080	15.6-16.5	80	800/900/1000	2000	3000	4.71	PD-10	TC-10	U-10/2
ANZ 1750 080	16.6-17.5	80	800/900/1000	2000	3000	5.14	PD-10	TC-10	U-10/2
ANZ 1870 080	17.6-18.7	80	800/900/1000	2000	3000	5.79	PD-10	TC-10	U-10/2
ANZ 1650 100	15.6-16.5	100	1000	2800	4000	7.02	PD-10	TC-10	U-10/2
ANZ 1750 100	16.6-17.5	100	1000	2800	4000	7.22	PD-10	TC-10	U-10/2
ANZ 1870 100	17.6-18.7	100	1000	2800	4000	7.91	PD-10	TC-10	U-10/2

Preformed guy grip with dead end clamp

Characteristic

Conditions for the usage

Intensity

Send Your Inquiry

Related Products

Preformed dead end guy grip

Preformed guy grip with dead end clamp

FDY Vibration damper

Preformed Dead End Guy Grip