FDY Vibration damper
Clamp Type Vibration Damper for ADSS/OPGW cables, withtuning fork structure of Damper Weight, is validated byChina Electric Power Research Institute that there are four frequency between 5~150HZ, and its vibration range is wider than FG Damper or FD Damper. Plenty Vibration Dampers have been installed on ADSS cables.
Overview
when cable suffers form aeolian vibration, the hammerhead of the vibration damper hanging on the cable may vibrate freely along with the movement of cable to make the steel stranded wires on anti- vibration damper rub each other,convert the vibration energy passed on to the anti- vibration damper to friction heat among steel standed wires and consume such heat energy,thereby effectively supperessing the aeolian vibration of cable and prolong the life of cable.
| FDY Vibration damper | |||||||
| Type | Cable range | Main size(mm) | Weight | ||||
| L | D | H | a | L1 | |||
| FDY-1/2 | 12.0-16.0 | 300 | 40 | 81 | 50 | 95 | 1.5 |
| FDY-2 | 12.0-16.0 | 370 | 46 | 81 | 50 | 130 | 2.4 |
| FDY-2/3 | 16.0-18.0 | 370 | 46 | 81 | 50 | 150 | 2.5 |
| FDY-3/4 | 18.0-22.5 | 450 | 56 | 97 | 60 | 150 | 4.1 |
| FDY-3/5 | 22.5-30.0 | 450 | 56 | 97 | 60 | 150 | 4.5 |
| FDY-4/5 | 22.5-30.0 | 500 | 62 | 97 | 60 | 175 | 5.6 |
| FDY-4/6 | 30.0-35.0 | 500 | 62 | 97 | 60 | 175 | 6.8 |
Send Your Inquiry
Related Products
-

Preformed guy grip with dead end clamp
Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, ...
阅读更多 -

Preformed guy grip with dead end clamp
The preformed tension set is widely used for the installation of bare conductors or overhead insulat...
-

Preformed guy grip
Dead end preformed is widely used for the installation of bare conductors or overhead insulated cond...
-

Preformed dead end guy grip
Ground wire for steel conductor; wire clamp is used for galvanized steel. Aluminum-clad steel, good ...

