• sns01
  • sns02
  • sns03
  • sns05
English

Iimveliso

  • Strain clamp

    I-clamp yoxinzelelo

    Izinto eziphathekayo: intsimbi / i-alloy

    Ubukhulu: Konke

    Ukwaleka: Yenziwe ngegalvanized

    Injongo: Izixhobo zokuhambisa amandla

    ukubuzaiinkcukacha
  • CPTAU series pre-insulated bimetallic cable lugs

    CPTAU series pre-insulated bimetallic cable lugs

    I-DTL-4 i-bimetallic lugs yangaphambili efakwe ngaphambili isetyenziselwa ukuseka uqhagamshelwano phakathi kweentambo ze-LV-ABC kunye nezixhobo zombane.Isundu senziwe nge-99.9% yobhedu ecocekileyo kwaye umkhono wenziwa nge-99.6% ye-aluminium ecocekileyo.Icandelo lomnqamlezo we-conductor linokuba li-elastic Ikhowudi yombala wendandatho ichaza ngokulula i-ring elastic kunye negrisi efakwe ngaphambili ukuze ingabi namanzi.Uvavanyo lokuxinana kwamanzi luqhutywa kwi-6KV phantsi kwamanzi ngomzuzu omnye.Ityhubhu yokugquma yenziwe ngepolima ekwaziyo ukumelana nemozulu kunye ne-UV-resistant.

    ukubuzaiinkcukacha
  • JJCD/JJCD10 insulation piercing grounding clamp

    I-JJCD/JJCD10 isibambiso sokugqobhoza isigqubuthelo somhlaba

    Umbane oPhezulu we-10kV iibholithi ezimbini ze-Insulation Ukugqobhoza Isiqhagamshelo esinezangqa zokuQalisa zoKhuseleko loMhlaba.

    Inkcazo

    I-10kv iibholithi ezimbini zokubhoboza isinxibelelanisi esine-Earthing Ring yoKhuseleko loMhlaba kunye noHlolo loMbane lweThutyana.Ilungele uninzi lweendidi zeekhondakta ze-ABC kunye noqhagamshelo kwinkonzo kunye neentsimbi zokukhanyisa.Xa uqinisa iibholiti, amazinyo amacwecwe oqhagamshelwano angena kwi-insulation kwaye aseke umnxibelelwano ogqibeleleyo.Iibholithi ziyaqiniswa de iintloko zichetywe.Ukuqinisa itorque eqinisekisiweyo (i-fuse nut).Ukuhluthwa kwe-insulation kuyaphetshwa.

    Imeko yenkonzo: 400/600V, 50/60Hz, -10°C ukuya ku-55°C

    Umgangatho: IEC 61284, EN 50483, IRAM2435, NFC33 020.

    Ifanelekile kwiAluminiyam kunye neekhonduki zobhedu

    ukubuzaiinkcukacha
  • 1KV 10KV insulation piercing clamp

    1KV 10KV isibambiso sokubhoboza isigqubuthelo

    I-Insulation Piercing Connector I-IPC isidibanisi sifanelekile kwi-aluminium kunye neziqhubi zobhedu kunye namalungu angalahlekiyo, isiphelo se-cap encanyathiselwe emzimbeni, I-Insulation imathiriyeli eyenziwe ngeglasi ekwazi ukumelana nemozulu ye-polymer eyomeleziweyo, amazinyo oqhagamshelwano enziwe ngobhedu olunkonkxiweyo okanye ubhedu okanye i-aluminium, ibholithi eyenziwe ngentsimbi ye-dacromet. .Xa uqinisa iibholiti, amazinyo amacwecwe oqhagamshelwano angena kwi-insulation kwaye aseke umnxibelelwano ogqibeleleyo.Iibholithi ziyaqiniswa de iintloko zichetywe.Ukuhluthwa kwe-insulation kuyaphetshwa.

    ukubuzaiinkcukacha
  • TTD Insulated piercing connector (fire resistance)

    I-TTD Isinxibelelanisi sokugqobhoza esigqunyiweyo (ukuxhathisa umlilo)

    Isinxibelelanisi sasisetyenziselwa umsebenzi wonxibelelwano ophilayo okanye womgca wokugqibela, kwaye umgca ongundoqo & wempompo yonke yayiyeyeAluminiyam egqunyiweyo okanye iCopper conductor.Isidibanisi esikwaziyo ukumelana ne-6kV flashover phantsi kwamanzi.Umzimba wayo okhuselayo unemozulu ephezulu kwaye uyaxhathisa ngoomatshini.

    Kwakulula ukuyifaka kwaye ikhuselekile ukuyisebenzisa.Ukugqobhoza kwangaxeshanye kwi-insulation kwi-main kunye nempompo, i-screws yokuqinisa yenziwe nge-Dacromet steel.Ukukhuselwa kumanzi kwintambo evaliweyo ngokuqina okudityanisiweyo kunye ne-insulating end caps.Isebe linokuba ngasekhohlo okanye ngasekunene.

    Ukufakela ngokulula izihlanganisi zebholithi enye enetorque ephezulu yokuqina.

     

    ukubuzaiinkcukacha
  • PAL Aluminum tension clamp

    I-PAL I-Aluminiyam yokunyamezela ibamba

    I-anchor clamp yenzelwe ukumisa umgca ongundoqo ofakwe kwi-insulated kunye nabaqhubi be-4 kwi-Pole, okanye imigca yenkonzo ene-2 ​​okanye i-4 conductors kwipali okanye eludongeni.I-clamp yenziwe ngumzimba, i-wedges kunye nebheyile esuswayo kunye nehlengahlengiswayo okanye i-pad.
    Undoqo we-Anchor clamps ziyilwe ukuxhasa umthunywa ongathathi hlangothi, i-wedge iyakwazi ukuzilungisa.I-self-open ibonakaliswe yizixhobo ezidibeneyo zasentwasahlobo zokufaka ngokulula i-conductor kwi-clamp.

     

    ukubuzaiinkcukacha
  • NLL Bolted type strain clamp

    I-NLL iBolted uhlobo olubambekayo loxinzelelo

    I-Tension Clamp

    I-tension clamp yolunye uhlobo lwe-hardware ye-tension enye esetyenziselwa ukugqibezela uxhulumaniso lwe-tensional kwi-conductor okanye intambo, kwaye inikezela ngenkxaso yomatshini kwi-insulator kunye ne-conductor.Idla ngokusetyenziswa ngokufanelekileyo njenge-clevis kunye neso lesokethi kwimigca yokuhambisa ngaphezulu okanye iintambo zokuhambisa.

    Uhlobo lwe-bolted clamp yoxinzelelo ikwabizwa ngokuba yi-dead end strain clamp okanye i-quadrant strain clamp.

    Ngokuxhomekeke kwizinto eziphathekayo, zinokwahlulwa zibe ziintlobo ezimbini: i-NLL series tension clamp yenziwe nge-aluminium alloy, ngelixa uchungechunge lwe-NLD lwenziwe ngentsimbi ethambileyo.

    I-NLL ye-tension clamp inokuhlelwa nge-diameter ye-conductor, kukho i-NLL-1, i-NLL-2, i-NLL-3, i-NLL-4, i-NLL-5 (efanayo kwi-series ye-NLD).

     

     

    ukubuzaiinkcukacha
  • VCXI Bimetallic Shear Bolt Lug

    VCXI Bimetallic Shear Bolt Lug

    Ulwandlalo

    Ifanele i-aluminiyam, iintambo ze-aluminiyam ialloy kunye nezixhobo zombane ezine-voltages ezirethiweyo ze-1KV nangaphantsi koqhagamshelo lwe-Copper terminal transition

    Izinto eziphathekayo

    Umzimba: i-alloy ye-aluminium ephezulu kunye ne-Cu≥99.9%

    I-Bolt: i-alloy yobhedu okanye i-aluminium

    Ukunyangwa kobuso: ukukha

    Umgangatho

    IEC 61238: 2003, GB/T 9327-2008

    ukubuzaiinkcukacha
  • DTLL Bimetallic mechanical lug

    DTLL Bimetallic mechanical lug

    I-Bimetallic mechanical lug isetyenziselwa ukudibanisa ii-conductors kunye neendawo zokuqhagamshelwa kwemigca yokusabalalisa kunye ne-voltage elinganisiweyo ye-35KV nangaphantsi kwii-terminals zokutshintshwa kobhedu-aluminium yezixhobo zombane ze-flat-panel;abaqhubi abasebenzayo: i-aluminium kunye ne-aluminium alloy conductors.

    ukubuzaiinkcukacha
  • Parallel Groove Clamp

    I-Parallel Groove Clamp

    I-torque clamp eyonga amandla yizifakelo zoqhagamshelo ezingathwali mthwalo, ezisetyenziswa ikakhulu kwiintambo zothumelo, iintambo zokuhambisa kunye nenkqubo ye-substation line, i-splicing kwaye idlala indima ephambili kwi-jumpers.

    Isebenza kucingo lwe-aluminiyam, ucingo lobhedu, ucingo olufakwe phezulu, ucingo lwe-ACSR, njl.

    ukubuzaiinkcukacha
  • NES-B1 Tension clamp

    I-NES-B1 Ibamba loxinzelelo

    Isixhobo sinomzimba ophambili, i-wedge kunye neringi yokuphakamisa esuswayo kwaye ehlengahlengiswayo okanye ipad.

    Ikliphu ye-anchor engundoqo enye yenzelwe ukuxhasa umthunywa we-pneumatic kwaye i-wedge inokulungiswa ngokuzenzekelayo.Ucingo okanye isibane sesitalato ikliphu yocingo ecaleni kwesikhokelo.

    Izinto eziphathekayo

    Izibophelelo zenziwe ngeepholima ezixhathisa imozulu kunye ne-UV-resistant okanye imizimba ye-aluminium alloy ene-polymer wedge cores.

    Intonga yokudibanisa elungiswayo eyenziwe ngentsimbi etshisiweyo etshisiweyo (FA) okanye insimbi engenasici (SS).

    ukubuzaiinkcukacha
  • NXJ Aluminum Tension Clamp

    NXJ Aluminium Tension Clamp

    Uthotho lwe-NXJ lufanelekile kwi-strain clamp insulation string ye-20kV i-eriyali yokugquma i-aluminiyam engundoqo yocingo lwe-JKLYJ okanye iziphelo ezibini ukulungisa kunye nokuqinisa ukugquma emoyeni.

    ukubuzaiinkcukacha
<< < Ngaphambili345678Okulandelayo >>> Iphepha 6/8